Ubbink Outside Living Industries 410-H120 Manual De Instrucciones página 9

WARRANTIES - After-sales service
Swimming pool 410 - H120 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly. or any changes made to structural elements without the manufacturer's agreement
1) Pump : 2 year warranty (electrical problems) under normal conditions of use. The following are not covered by the warranty: damage due to abrasion or corrosion (particularly in the case of treating the water by
salt electrolysis), damage due to a faulty connection, equipment dismantled or repaired by a third party, breakage of parts (pump stand, pre-filter cover, grooved end fitting), using the pump when it is empty or
immersing the pump (e.g. if the pump house is flooded). The warranty is not valid if the electric cable and/or the plug are replaced, removed or damaged.
2) Liner : 2 year warranty under normal conditions of use. The following are not covered by the warranty: rips, holes, tears, stains (treatment products put straight into the water) stains related to the development
of algae, stains related to decomposing foreign bodies in contact with the liner, stains and discolorations resulting from the impact of oxidising products, discoloration and wear due to materials rubbing on various
surfaces. Distortions in the liner if it has been out of water for more than 24 hours (never completely empty your pool). See the warranty document that comes with the liner.
3) Filter : 2 year warranty under normal conditions of installation and use: tank, drain plug, collar and multiport valve.... The following are not covered by the warranty: problems with waterproof sealing due to
operating at a level of pressure which exceeds the maximum pressure permitted (see instructions for the filter).
4) Skimmer : 2 year warranty on the waterproof seals.
5) Wooden structure : 10 year warranty against rotting and damage caused by insects. The following are not covered by the warranty: changes in the colour of the wood caused by the climate, natural distortions
(splits, cracks, knots and minor flaws in the tongues of the planks which do not have any adverse effect on the mechanical strength of the wood or on the assembling of the pool). The warranty does not cover
incorrect assembling or storage which may cause the wood for the sides of the pool to become warped (assembling the pool a long time after contents have been taken out of the packaging) or distortion of the
planks by the pressure of the water, which does not have any detrimental effect on the mechanical resistance of the pool. Any additional protection of the wood for the structure can only be undertaken using a
product which is compatible with autoclave treatment.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty:
- Till receipt / proof of purchase.
- Photograph of the damaged part or the problem in question
Shop :
City :
Contact department :
Direct tel :
Code Ref. Désignation
7514114 Sacrifice part 45 x 135 x 280 mm
PF 7514113 L-section finish 28 x 70 x 1260 mm
PR 7514097 Post 45 x 135 x 1275 mm (reinforcement)
C 7514048 Console edging 45 x 230 x 170 mm
7514049 BWooden stop block for the skimmer flap 30 x 20 x170 mm
PL 7100201 Pair of rungs for wooden ladder H120/130 cm
ME 7514052 Wooden ladder steps 28 x 145 x 600 mm
MGI 7514060 Pine edging 28 x 145 x 1878 mm int
MGE 7514061 Pine edging 28 x 145 x 2050 mm ext
MSD 7514118 Pine outer right skimmer edging 28 x 145 x 724 mm
MSG 7514119 Pine outer left skimmer edging 28 x 145 x 724 mm
M 7514070 Plank 45 x 145 x 2080 mm
MS 7514071 Upper plank 45 x 135 x 2080 mm
2MS 7514072 Upper 1/2 plank 45 x 67 x 2080 mm
2MI 7514073 Lower 1/2 plank 45 x 77 x 2080 mm
MSS 7514074 Upper skimmer plank 45 x 135 x 2080 mm
MIS 7514075 Lower skimmer plank 45 x 145 x 2080 mm
MR 7504090 Water jet plank 45 x 145 x 2080 mm
7514149 Sandbag (25 Kg)
R 7514016 Hung 2.06 ml hanging rails
7514750 3-step stainless steel ladder
7504397 Poolmax
7514704 Filtration
7504410 Flexible pipe 8m long
7514030 Protection felt
S 7514019 Skimmer, large
NOTICE 410 - H120-2018/1.indd 9
- Warranty filled out correctly.
- Reference number of the faulty part.
Client :
Address :
City :
Tel :
Qty Qty
Hardware kit
7514180
parcel ASS
2 Code Ref. BREAKDOWN OF THE HARDWARE KIT
A0 7514267 Console + reinforcer bag
12
A3 7514638 Console + reinforcer bag
6
C2 7514639 Hung rails bag
12
DMI 7514553 Edging screw bag
2
DMP2 7514618 Edging screw bag
E 7514145 Skimmer flap bag
1
G 7514146 Wooden ladder + finishing profile bag
5
7514144 Stainless steel plates 275 x 110 x 1 mm
6
5
1
1
43
2
3
3
1
1
1
2
6
1
PR
1
1
1
1
1
2MS
8
7514631
1
Qté Qté
parcel ASS
1
1
1
1
1
1
1
1
PL
R
MSG
MR
M
2MI
II / 18-1
Blue 50/100 liner 410 - H120 cm 1
ME
MS
C
MSD
ME
S
02.01.18 10:20