Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Mazda 3 2004-2009
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• Bonus display replacement pocket
• Retains factory display for automatic climate controls
(2006-2009 models)
KIT COMPONENTS
• A) Radio housing • B) ISO brackets • C) ISO trim plate • D) Display replacement pocket
• E) Display retention brackets • F) (2) 3/8" x #10 bolts • G) (2) #10 nuts • H) (2) Panel clips
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7903
Antenna Adapter: • Not required
METRA. The World's best kits.
Installation instructions for part 99-7504
99-7504
C
D
F
metraonline.com
Dash Disassembly
Kit Preparation
Kit Assembly
–DIN radio provision with pocket ......................3
–ISO DIN radio provision with pocket ................3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
E
CAUTION!
G
H
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
Table of Contents
.............................................2
..................................................2
Metra recommends disconnecting the negative bat -
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
Tabla de contenido
loading

Resumen de contenidos para Metra 99-7504

  • Página 5: Características Del Kit

    Instrucciones de instalación para la pieza 99-7504 Indice Mazda 3 2004-2009 99-7504 ..........2 Desmontaje tablero ..........2 Preparación del kit CARACTERÍSTICAS DEL KIT • Provisión de radio DIN con cavidad Ensamble del kit • Provisión de radio ISO DIN con cavidad –...
  • Página 6: Desmontaje Tablero

    99-7504 Desmontaje tablero Preparación del kit Soportes pantalla/Montaje de 1. Desenganche y quite el panel de la pantalla por encima de la radio. cavidad (Figura A) Vehículos automáticos de control Consejo: Abra la guantera y empezar de clima (2006-2009) en el centro del panel, trabajando 1.
  • Página 7: Ensamble Del Kit

    Metra recomienda fábrica y el conector de la antena en que use adaptadores adecuados de el tablero y haga todas las conexiones acoplamiento de Metra y/o de AXXESS. necesarias al radio. Metra recomienda Vuelva a conectar la terminal negativa (Figura B)
  • Página 8: Importante

    Instrucciones de instalación para la pieza 99-7504 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...

Tabla de contenido