Tabla de contenido
2.6.5 Menú de Configuración – Ajustes de Dispositivo
NOTA: Hay ayuda sensible al contexto disponible para todos los menús. Al resaltarlo, sostenga la
Home Screen
Main Menu
Device Setup
Quick Start
Identity
Basic Config
I/O Config
Display Config
Advanced Config
Factory Config
Home Screen
Main Menu
Device Setup
Quick Start
Identity
Basic Config
I/O Config
Display Config
Advanced Config
Factory Config
28
➪
ENTER por dos segundos. Use
tecla
Model
(read only)
Magnetrol S/N
Hardware Rev.
Firmware Rev.
Long Tag
Measurement Type:
Level Only
System Units
Volume and Level
Antenna Model:
RAA-x TFE Rod
RAB-G PolyP Rod
RAB-L PolyP Rod
RAB-x PolyP Rod
RAC-x Halar Rod
RA3-x 3" Horn
RA4-x 4" Horn
RA6-x 6" Horn
Antenna Extension:
-0** No nozzle
-1** Nozzle ≤ 4"
-2** Nozzle ≤ 8"
-3** Nozzle ≤ 12"
Antenna Mount:
NPT
BSP
Flange
Tank Height:
20 inches to 130 feet
(50 cm to 40 meters)
Stillwell I.D.:
3 to 8 inches
80 to 200 mm
ARRIBA y
Level Units:
Inches
Feet
Millimeters
Centimeters
Meters
Tank Height
20 inches to 130 feet
(50 cm to 40 m)
Antenna Model:
RAA-x TFE Rod
RAB-G PolyP Rod
RAB-L PolyP Rod
RAB-x PolyP Rod
RAC-x Halar Rod
RA3-x 3" Horn
RA4-x 4" Horn
RA6-x 6" Horn
Antenna Extension:
-0** No nozzle
-1** Nozzle ≤ 4"
-2** Nozzle ≤ 8"
-3** Nozzle ≤ 12"
(read only)
(read only)
(read only)
Dielectric Range:
1.7 to 3.0
3.0 to 10
Above 10
Foam:
None
Light
Medium
Heavy
Turbulance:
None
Light
Medium
Heavy
Rate of Change:
< 5 in/min
5-20 in/min
20-60 in/min
> 60 in/min
58-602 Transmisor Radar Pulsar® Modelo R96
ABAJO para navegar.
Antenna Mount:
NPT
BSP
Flange
Dielectric Range:
1.7 to 3.0
3.0 to 10
Above 10
4 mA Set Point (LRV):
0 to 130 feet
(0 to 40 meters)
20 mA Set Point (URV):
0 to 130 feet
(0 to 40 meters)
PV Alarm Selection:
High (22 mA)
Low (3.6 mA)
HOLD (Last Output Value)
System Units:
Inches
Feet
Millimeters
Centimeters
Meters
ECHO REJECTION:
View Echo Curve
View Reject Curve (Rej Profile Valid)
Echo List Mode
Level
Distance
Live Echo List
Rejected Echo List (Rej Profile Valid)
Reject Curve End
Echo Reject State
Off
Disabled (Rej Profile Saved)
Enabled (Rej Profile Valid)
NEW REJECT CURVE
Select Target Echo
New Rej Curve End
Save Reject Curve
Tabla de contenido
