Catalogue HY10-6012-UM/EU
Declaración de conformidad
Manufacturer:
Product:
Person authorised to compile the technical file: Rikard Eriksson, Parker Hannifin Manufacturing Sweden AB
Parker Hannifin Manufacturing Sweden AB declares, according to Annex VIII of the Machinery Directive 2006/42/EC, under sole
responsibility that the product above to which this declaration relates fulfils all the relevant provisions of the Machinery Directive.
The product is in conformity with the requirements in the following standards and directives.
- Safety of machinery – Basic concepts, general principles for design, SS-EN ISO 12100-1/A1:2009 and
SS-EN ISO 12100-2/A1:2009.
- Safety of machinery – Safety requirements for fluid power systems and their components – Hydraulics,
SS-EN ISO 4413:2010.
- Pumps and pump units for liquids – Common safety requirements, SS-EN 809 + A1:2009/AC:2010.
- Electric motors used on the product comply with the Low Voltage Directive (LVD) 2006/95/EC and the Electromagnetic
Compatibility Directive (EMC) 2004/108/EC
The above is valid for a complete product delivered by Parker Hannifin Manufacturing Sweden AB and a complete product is
CE-marked by Parker Hannifin Manufacturing Sweden AB.
If the product is not delivered complete by Parker Hannifin Manufacturing Sweden AB the product is also not CE-marked by
Parker Hannifin Manufacturing Sweden AB and must not be put into service until the product has been declared in conformity with
the requirements of the relevant directives and standards.
Sätra, January 15 2013
EC Declaration of conformity
Parker Hannifin Manufacturing Sweden AB
Accumulator and Cooler Division
Strömsätravägen 16
SE-127 35 Skärholmen
Sweden
Phone: +46 8 636 07 00
www.parker.com
Parker QPM3 Low pressure pump with electrical motor
___________________________
Rikard Eriksson
Technical manager
Parker Hannifin Manufacturing Sweden AB
Installation and servicing manual
Low pressure pump, QPM3
31
Parker Hannifin Corporation
Hydraulics Group