Connecting The Product - Alpine DVR-C320S Guía De Referencia Rápida

Overviewing connection diagram
Follow the connection diagram to properly install the product.
The connection diagram is for reference only. The product must be
professionally installed in the vehicle by an Alpine authorized dealer/a trained
specialist mechanic.

Connecting the product

Car charger cable
Hardwiring cable
R CAM
F CAM
LIN
CABLE
LIN
CABLE
REMOCON
REMOCON
OUT
R CAM
Yellow
BAT
Red
ACC
Black
GND
(4)
(6)
Not used.
(7)
Not used.
(8)
IN
(8)
(1)
DVR-C320S
* Use only when the length of the
rear camera cable is insufficient.
(2)
Rear camera
(3)
Rear camera extension cable*
(5)
(1) BAT
Connect the cord that supplies battery power (12V).
(2) ACC
Connect the cord that supplies accessory power (12V).
(3) GND (ground cord)
Connect this securely to a metal part of your vehicle's body.
Insufficient grounding may result in noise or malfunction.
(4) R CAM (rear camera video input terminal)
This terminal is used to input video from the rear camera.
(5) F CAM (front camera video output terminal)
This terminal is used to output a video signal.
(6) (7) Not used.
When connected to an Alpine product, some features of this
product or other device may be unavailable.
(8) REMOCON IN /OUT cable
Used when the product is used in combination with Alpine
navigation/display audios that support REMOCON
communication.
Rear camera
cable
11