Time/Date Set Up - TRUE METRIX GO Guía De Prueba Rápida

TIME/DATE SET UP

If meter turns off at any time during Set Up, go back to Step #1 and begin again.
1. Start with the meter off. Press and
hold the Set Button until the full
Display appears and begins to blink.
Release Set Button.
2. The time appears and the hour begins
flashing. Change the number by
pressing the Set Button until the
desired number appears.
40
Pressing and releasing the Set Button only makes the numbers increase by one. Once the number reaches its
limit, it resets to the lowest number. Pressing and holding the Set Button increases the numbers quickly. Release
Set Button when the number you want is reached.
3. After the correct hour appears, the
number flashes for about 10 seconds
before going to the minutes.
Hours Minutes
Month Day
4. Repeat steps 2-3 to set up minutes,
month, day and year.
41
Year