Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Do not switch the device on immediately after it has been exposed to
changes in temperature. Protect the device against damage by leaving
it switched off until it has reached room temperature.
•
Use high-quality shielded cables with low capacitance throughout the
system.
•
Avoid using excessively long cables. Make sure all plugs and jacks are in
perfect working order to avoid hum, noise and pops that could damage
speakers.
•
Route one cable at the time. Pay attention to the labelled audio input
and output jacks.
•
Always begin with the volume controls at minimum position. Gradually
turn up the volume after connection is completed.
•
Use the controls with restraint. Rapid movements may damage the
speakers due to amplifier clipping.
•
Familiarise yourself with the functions of the device before actually
using it.
•
All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
•
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
•
Use the original packaging if the device is to be transported.
•
Keep this manual for future reference.
4.
Features
•
4 channel Mic/Line stereo or 8 channel mono input
•
suitable for all kind of small applications
•
with low noise, high and low impedance circuit design
•
each line with separate volume control
•
works with 9 V battery or with an adaptor (not incl.).
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
battery compartment (underside)
2
on/off switch
3
power adapter input
4
output to amplifier (A and B)
5
channel 1 ~ 4 inputs (A and B)
6
MIC/LINE selector for A inputs
V. 02 – 14/01/2013
PROMIX08
4
©Velleman nv
Tabla de contenido
