Before Vcr Operation; On-Screen Display (Osd); Setting The On-Screen Display - Magnavox MDV560VR Guia Del Usuario

14 Getting Started

Before VCR Operation

On-Screen Display (OSD)

The On-Screen display provides feedback on the current sta-
tus of the DVD+VCR.
PLAY HI-FI
SP
OCT 8 , FRI
TAPE SPEED DISPLAY
Shows the current tape speed.
FUNCTION DISPLAY
Indicates playback function status.
HI-FI DISPLAY
Indicates when unit is playing back tape recorded in Hi-Fi.
CHANNEL DISPLAY
Indicates the selected channel (or LINE1, LINE2 input mode).
STEREO/SAP DISPLAY
Shows the type of audio signal received by the VCR tuner.
DATE DISPLAY
Shows the current date.
CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, tape counter and remaining time on the
tape.
Each press of the OK button changes the TV screen in the
following sequence.
STOP CH 4
SP STEREO
OCT 8 , FRI 2:15 PM
2:15 PM
Notes
" Function displays remain on the TV screen for 5 seconds.
" Clock (or tape counter, tape remaining) mode will continue until
you press OK.
" Tape counter and remaining tape length indicator appear only
when a cassette is inserted. Also, the remaining tape length indica-
tor appears after any tape operation.
CH 4
STEREO
2:15 PM
(MONO is not displayed)
0:35:40
REM 1:58
EASY INFORMATION
If Extended Data Service (XDS) signals are provided along
with normal TV signals in your area (or with playback of a
tape recorded with Extended Data Service (XDS) signals),
the station ID, program title and program details are shown
on the TV screen.
When viewing a channel with Extended Data Service (XDS) sig-
nals, press OK and the station ID will appear on the TV screen.
Press OK again to view program details, etc.
When viewing a tape recorded with Extended Data Service
(XDS) signals, press OK twice and the program title and
program details will appear on the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program (N/A,
G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A
means that the motion picture ratings are not applicable to
this program.
CH 4
SP WABC STEREO
"Home video"
OCT 8 , FRI 2:15 PM
Easy Information Screen
(Station ID)

Setting the On-Screen Display

The VCR's on-screen menu system allows you to set the
clock, channels, timer recordings, and other setup options.
Menu Selection
Follow these steps to access the VCR's on-screen menu
system.
1 1
Press SYSTEM MENU and the MAIN menu will
appear.
2 2
Select the desired menu using the v/V buttons
and then press OK.
Note
Menus remain on-screen for 3 minutes.
MAIN MENU
3 3
Press SYSTEM MENU when finished.
PROGRAM DETAILS
"Home video"
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
CLOCK SET (page 16)
PROGRAM (page 22)
TUNING (page 15)
SETUP (page 15)