PEDESTAL INSTALLATION
The pedestal accessory includes:
• Pedestal base
• One (1) drawer divider
• Four (4) brackets
Tools Needed for Installation:
• Phillips-head screwdriver
• Wrench (supplied)
For dryer
For washer/combo
Make sure the leveling feet of the appliance
1
are fully retracted (see detail for leveling
washer feet in Step 2); then position the
appliance on top of the pedestal.
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
O P T I O N A L AC C E S S O R I E S
O P T I O N A L AC C E S S O R I E S
• Eight (8) screws
• Wrench
To ensure safe and secure installation, please
thoroughly follow the instructions below.
wWARNING
• Incorrect installation can cause serious
accidents.
• The appliances are heavy. Two or more
people are required when installing the
pedestal. There is a risk of serious back injury
or other injuries.
• Do not allow children to play in or on the
drawer. There is a risk of suffocation or injury.
• Do not step on the handle. There is a risk of
serious injury.
• If appliances are already installed,
disconnect them from all power, water, or
gas lines and from draining or venting
connections. Failure to do so can result in
electrical shock, fire, explosion, or death.
Once the leveling feet of the washer are fully
2
retracted, tighten all locknuts securely.
NOTE: The leveling feet on the dryer do not
have locknuts.
Tighten all 4
locknuts securely
33