Troubleshooting Guide - Olimpia splendid ASTOMI SOUND Instruccioes Para La Instalación, Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

PROBLEM
The appliance does not work.
Air blows but water vapor is not
produced.
Humidity level is low.
The humidity has a bad smell.
White powder is formed near the
appliance.
The appliance has stopped
working.
Water accumulates outside the
appliance or around it.
The appliance will not start.
The appliance does not play
music.
EN - 9

9 - TROUBLESHOOTING GUIDE

Power plug: Disconnect it from the power outlet and plug it in again.
Power Failure: When the power is returned, try again.
There may be oil residues in the reservoir; wash the reservoir and try again.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk (Fig. H).
If you use hard water, replace with softer water.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk (Fig. H).
The water in the unit is too cold: Replace with cool, but not cold water.
Poor maintenance or dirty water: Accurately clean the reservoir and fill it up with
clean water.
Hard water may deposit a certain of dust. Dust in the air also settles because of
added humidity in the room. Use distilled water if this becomes a nuisance.
Little or no water. Unplug the appliance and fill up the reservoir.
Humidity saturation. Lower the mist control setting (H LED off).
Point the nozzle away from objects. Lift the appliance onto a water-resistant lev-
elled surface at least 60 cm above the floor.
Too much water in the reservoir. Do not exceed the MAX marking.
• WIRELESS BT function not enabled on your smart device.
• Smart device disconnected.
• Smart device and appliance are too far from each other.
POSSIBLE SOLUTION
Tabla de contenido
loading

Tabla de contenido