Manual Settings; Net Remote Pin Setup; Network Profile; Clear Network Settings - Albrecht Audio DR 890 CD Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

12.2.5. Manual Settings

Choose network connection and enable or disable DHCP (Dynamic Host Configuration Protocol)

12.2.6. Net Remote PIN Setup

Allows you to define a PIN number to be entered before being able to connect to DR 890 CD re-
motely over a network.)

12.2.7. Network Profile

EN
DR 890 CD remembers the last four wireless networks it has been connected to, and automatically
tries to connect to whichever one of them it can find. From here you can see the list of registered
networks. You can delete unwanted networks by turning and pressing the reel or OK on the remote
control then choosing YES to confirm delete.

12.2.8. Clear network Settings

To clear all network settings choose YES and confirm with OK

12.2.9. Keep Network Connected

If you choose keep network connected, the WiFi will not disconnect even you are in standby mode.
Otherwise, the connection will always be available. This option allows the device to be ready for
DLNA streaming in any operating modes. Details for DLNA streaming, refer to Section „4.5. DMR
(DLNA Streaming)".

12.3. Time/Date

Set the time manually or auto update time format, time zone and daylight.

12.4. Language

The default language is German. Change it as your preference.
The following languages are available: English, Danish, Dutch, Finnish, French, German, Italian,
Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish.

12.5. Factory reset

A factory reset resets all user settings to default values, so that time and date, network configura-
tion and presets are lost. However, the DR 890 CD's current software version is maintained, as is
the registration with the Internet Radio portal. Internet Radio favourites therefore remain unless you
re-register your DR 890 CD with another account on the portal website.

12.6. Software Update

From time to time, software upgrades may be created with bug fixes and/or additional features. You
can either check manually or set DR 890 CD to check periodically automatically (this is the default).
If newer available software is detected, you will be asked if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed. After a software upgrade,
all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that DR 890 CD is plugged into a stable main
power connection. Disconnecting power during an upgrade may permanently damage the unit.
50
English
Tabla de contenido
loading

Tabla de contenido