Inserting An Sd Card; Battery And Sd Card Installation; Camera Setup - Primos Hunting AUTOPILOT 65054M Manual De Instrucciones

BATTERY INSTALLATION
To maximize battery life, you should install a set of 8 AA lithium (for longest life) or alkaline batteries.
NOTE: Always set the power switch to the OFF position when installing or removing batteries.
Please make sure the batteries are inserted correctly, as indicated inside the battery tray prior to
inserting the tray into the camera. Do not mix old and new batteries. Do not mix battery types-use
ALL lithium or ALL alkaline. Rechargeable batteries are not recommended.
SD CARD INSTALLATION
Your AUTOPILOT Camera has a memory card slot, to accept SD cards up to 32 GB max. capacity (not
included). When the SD card is full, the camera will stop capturing images.

INSERTING AN SD CARD

• Make sure the power switch is in the OFF position whenever inserting or removing an SD card.
• Insert an SD card into the card slot completely and oriented correctly as shown by the icon above
the slot (label up, contacts facing down and notched corner on the right).
• To remove the SD memory card, depress the SD card and pull out the card gently.
Using a new, blank SD card is recommended. If the SD card has been used in another device, please
make sure to format it (FAT32) using your computer before you set the camera to capture photos.
Primos recommends unchecking "Quick Format", to ensure all sectors on the card are usable. New
cards are ready to use straight from the package. With the power switch in the SETUP position, the
display will indicate "No Card!" if a card is not inserted; or if one has been inserted incorrectly.

CAMERA SETUP

Move the large green slide switch from OFF to AIM. After a few seconds, the display will show the
number of photo/video files that have been captured and saved to the SD card, with a battery
level (%) meter below it. This set up screen will allow you to set up the below highlighted camera
functions.
7