Switching Off A Burner - Proline PGH4FGL-FR Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

NOTE: When switching on a burner, after installation or a power cut, it is normal for the
ignition spark to be activated automatically.
WARNING: If the burner flames are accidentally blown out, switch off the burner and
do not try to relight it for at least 1 minute.

Switching Off a Burner

Turn the corresponding control knob clockwise to the
Cooking Pans
Suitable pans
Burner
Rapid burner
Semi rapid burners
Auxiliary burner
Precautions for use
Use pans which are the right size for each burner (see above table). Do not use small
pans on large burners. The flame must not touch the sides of the pans.
Only use pans with a flat base.
Always position pans over the centre of the cooking zone, and turn the handles to a
safe position so they cannot be knocked or grabbed.
Never operate the hob without pans.
When you do not use the appliance, keep the gas valve off.
Take care when frying food in hot oil or fat, as the overheated splashes could easily
ignite.
As soon as liquid starts boiling, turn down the flame so that it will keep the liquid
1. Burner cap
2. Burner crown
3. Burner plate
4. Ignition sparker
5. Thermocouple
Minimum pan
diameter
20
cm
16
cm
12 cm
13
position.
Maximum pan
diameter
24 cm
18
cm
16 cm
Tabla de contenido
loading

Tabla de contenido