Idiomas disponibles
Idiomas disponibles
For example, if "- - : - -" is assigned to S1 (or S2, then circuit 1 will not turn on until
S2 (or S4). Likewise, if "- - : - -" is assigned to S2 (or S4), then circuit C1 will turn
off at S1 (or S3) and will not turn on again until the following sunset.
Prog.- Programme assignment
This function allows us to assign one of four programmes to each day of the week
(see Fig. 3). It is also used to programme the times of partial turn-offs (S1 y S3)
and partial turn-ons (S2 y S4).
The programming is initiated by pressing the button Prog, at which point the
following data will be requested:
Function
Display
Indication
Weekly Pro-
PX
Arrowhead
gramme
(Note 1)
pointing to day 1
Weekly Pro-
PX
Arrowhead
gramme
(Note 1)
pointing to day 7
Hour S1
- - : - -
S1
Minute S1
02 : 59
Hour S2
- - : - -
S2
Minute S2
02 : 59
Hour S3
- - : - -
S3
Minute S3
02 : 59
Hour S4
- - : - -
S4
Minute S4
02 : 59
(Note 1) P0, P1, P2, PH
ADITIONAL FUNCTIONS
Manual reset
Important: If a manual reset is made, all data will be lost.
This is done by pressing the keys H+
on the display will light up for two seconds. The date and time are set for 1 January
1996 at 00:00 hours.
Following the Reset, programming date and time is necesary..
Programming daylight-saving time changes
Daylight-saving time changes are preset and the user may select from three
possibilities:
1. no
= no change;
2. dat1
= last Sunday of March and October;
3. dat2
= last Sunday of March and fourth Sunday of October.
The choice is made by pressing Ok for two seconds following a reset (while all
segments are lit. See Manual Reset). Then select the option using ↓ and ↑ and
then Ok.
H.- Programming Holidays
This function automatically assigns the programme PH to the next days (up to 99)
avoiding to modify the program.
It is accessed by pressing button H.
Function
Display
Indication
Holiday
00
period
Manual switching
This allows circuits to be activated/deactivated manually without programme
modifications. To do so, use keys C1 for channel 1 and C2 for channel 2. For both
circuits, pressing the respective key just briefly changes the status, while pressing
the respective key for a longer period of time changes the status and converts it to
permanent. The circuit status is indicated by On/Off. Permanent status is shown by
a point on the display.
Priorities
-Permanent manual programming has priority over all other programmes.
-Manual switching changes status until the next automatic action to the contrary.
Range
P0..PH
P0..PH
00..24
00..59
00..24
00..59
00..24
00..59
00..24
00..59
+C2+PROG simultaneously. All segments
Range
H
00..99
Coverage Map
See Fig.4.
01
02
03
04
05
06
07
08
09
10
1h52'
1h36'
1h20'
Example: 09 1h36'
Technical Data
Supply voltage and
frequency
Switching capacity
Maximun loads:
Fluorescent lamps not compensated:
Fluorescent lamps compensated:
Filament lamps:
Halogen lamps ow voltage:
Halogen lamps (230VAC):
Dulux:
Power consumption
Contact material
Power reserve
Memory
Switching accuracy
Operating accuracy
Astronomical
adjustment
Operating temp.
Transport and
storage temperature
Protection class
Protection category
External dimensions:
35
ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61
Teléfono:+ 34 91 5672277;
0h16'
1h04'
0h48'
0h32'
As per feature label
16 (2) A / 250 VAC
1.200 W
920W 100uF
2.500 W
500 VA
2.500 W
800 W
8 VA maximum
AgSnO
2
6 years with lithium battery at 23ºC
Non-volatil
Better than 1 second
<= ± 1 s/day at 20 C
Weekly
-10 C to+45 C
-20 C to +70 C
II as per EN60335 under correct
assembly conditions
IP 20 as per EN 60529
60.5
55
A016.26.49137
E–28020 MADRID
Fax:+34 91 5714006
E-mail:
http://www.orbis.es
0h00'
