Automatic Channel Set-Up; Fine Tuning A Channel; Skipping A Channel - James F338 Manual De Funcionamiento

Automatic Channel Set-up

Channel set-up involves selecting all the settings required
to be able to search for and store all the channels you can
receive. Make sure that the television is switched on and
follow all the steps in turn specified hereafter.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Channel icon
and press the up or down direction or OK button to display
the Channel menu.
1. Press the up or down direction button to select
Antenna/Cable option.
2. Press the left or right direction button to select
signal source: Antenna or Cable.
3. Press the up or down direction button to select
Auto Tuning option.
4. Press the right direction or OK button to start channel
search.
Note: Depending on the number of channels you
receive, it may take several minutes for the channel
search to finish. If you want to interrupt the process,
press the Menu button. The channels already found
will be stored.
5. Channels are arranged in a pre-set order. Refer to the
following sections if you want to fine tune or skip a
channel.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.
1. Activate the Channel menu and p
down direction button to select
2. Press the left or right direction button to fine tuning
3. Press Menu to return or Exit to close the menu.

Skipping a Channel

If a channel was stored twice or its reception is poor, you
can simply skip it. The skipped channels can not be
selected by pressing the CH +/- buttons.
1. Press the up or down direction button to
Current Channel option and press the left or right
direction button to select the channel number to be
skipped.
2. Press the up or down direction button to select
Skip option and press the left or right
to select Yes.
Channel
3. Press Menu to return or Exit to close the menu.
Antenna/Cable
Antenna
Auto Tuning
45.75MHZ
Fine-Tune
Current Channel 6
Channel Lock No
Skip No
the
the
the
ress the up or
the Fine-Tune option.
8
General Operation
select the
direction button
the