General Warnings; Important; General Description; Fuels - Bio Bronpi CAROL-MIXTA Instrucciones De Instalación, Uso Y Mantenimiento

1.

GENERAL WARNINGS

The installation of a stove must be done according to the local, national or European regulations.
Our liability is limited to the supply of the equipment. The installation must be done according to the procedures expected for this
kind of equipments according to the indications included in this manual and the rules of the profession. The fitter must be qualified,
with official license and they will work for enterprises that accept responsibility of the installation as a whole.
Bronpi Calefacción, S.L. will not be responsible for the modifications made to the original product without the prior written permission as well
as for the use of non-genuine spare parts or pieces.
IMPORTANT!!!: this product includes a spray paint can inside the combustion chamber which must be removed before the
ignition.
2.

GENERAL DESCRIPTION

The equipment that you have purchased contains the following pieces:
• Stove body placed on the pallet.
• Inside the combustion chamber you can find: a box/bag with a thermal glove that allows us to handle the air controls. One electric
blowtorch (batteries not included) in order to facilitate fire's ignition. One spray paint can to repair possible scratches. One small rake
in order to poke the fire and move the embers. The electrical interconnection cable between the stove and the network. A yellow leaflet
with the most important warnings and considerations. A book in order to register all maintenance tasks performed to the stove as well
as this installation, use and servicing manual.
• Inside the combustion chamber you will also find the baffle-plate, burner and the ash pan.
The stove consists of several elements of steel sheets welded, with different thickness, and, depending on the model, pieces of cast iron or
vermiculite (orange-coloured refractory material that covers the walls). It also has a panoramic door with vitro ceramic glass (resistant up to
750ºC) and ceramic cord for the air tightness of the combustion chamber.
Heating is produced by:
a. Natural convection: the air passes through the double hood, the stove gives off heat.
b. Forced convection: thanks to the fan placed on the bottom of the stove, the air at room temperature is aspired and it is returned
to the room at a higher temperature.
c. Radiation: through the vitro ceramic glass and the body the heat is irradiated towards the environment.
Baffle plate
The baffle plate is a fundamental part for the proper operation of the stove. It must be placed in the right position and the stove must not be
used without the baffle plate. This would invalidate the warranty.
The combustion is not always stable. In fact, it can be affected by the weather conditions or the outside temperature. This modifies the draw
of the chimney. For this reason, our stoves have a baffle plate.
WARNING:
The lack of the baffle plate causes an excessive draw. This causes a fast combustion, excessive wood consumption and
the overheating of the equipment.
Due to safety reasons during the transport, the baffle plate is not assembled. You will find it inside the combustion chamber. The baffle plate
must be rested on the side supports of the combustion chamber and you have to fit on the groove where the air of the double combustion
goes off.
3.

FUELS

You can use on the stove you have bought wooden pellet of excellent quality and certified, and wooden logs.
WOODEN PELLETS
WARNING:
THE USE OF A LOW QUALITY PELLET OR ANY OTHER MATERIAL IN DISAGREEMENT WITH THE SPECIFICATIONS
MENTIONED BELOW IMPLIES THE CANCELLATION OF THE WARRANTY AND THE RESPONSIBILITY BOUNDED TO THE
PRODUCT.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS 24 CAROL-MIXTA