Product Overview; App Installation; English; Power On/Off - FreeVision VILTA-M Pro Guia De Incio Rapido

Product Overview

Smartphone
Mounting Holder
Wireless Charging
Roll axis
Roll axis Buckle
Scene Mode Switch
Camera Parameter
Adjustment Wheel
Focus/Zoom Wheel
Focus/Zoom Button
Mark A Button
Mark B Button
Menu/Back Button
EV Button
Shutter

App Installation

Functions of VILTA-M Pro are introduced in this section. Please read carefully before use, or read
the full user manual with all its features on the official website: www.fvshare.com. Product
technology continues to develop, which is subject to change without prior notice.
Download FV Share
For Android users, please search FV Share in Google Play or Huawei store. (Android 5.0 or above)
For iOS users, please search FV Share in Apple Store. ( iOS 9.0 or above)
0 1

English

Portrait and
Landscape Knob
USB-A
Charging Port
Tilt axis
Adjustable Arm
Balance
adjustment Knob
Pan axis
Connection Indicator LED
Status Indicator LED
Power Button
Type-C Charging Port
OK/DISP Button
Album Mode Button
ISO Button
Joystick
Custom Mode Button
Shutter Button
Record Button
Handle Grip
1/4 Inch threaded screw
Smartphone Installation
1
Place the phone in the phone holder while pulling the sides of the holder outwards, then release
the sides of the holder. It is recommended that you position the phone close to the tilt motor.
2
Turn the phone over facing downwards, adjust the position of the phone in the holder to balance
the tilt motor(refer to the picture below) and then tight up the adjustment knob.
3
Loose the knob, and rotate the phone holder. Tighten the knob again.
( Follow this step when using vertically )
After the phone is installed on the gimbal, please check whether the phone is flushed with the
holder.If not, please manually adjust it to the middle position.
Always keep your phone mounted and well balanced prior to power on.

Power On/Off

Long press power button for 3 seconds
to power on/off.
Connect to FV Share
1
Turn on bluetooth.
( For Android users, please turn on GPS )
2
Power on VILTA-M Pro.
3
Open FV Share, tap Connect to Gimbal and choose your gimbal to connect. After successfully
connecting, the blue connection indicator LED stops flashing and turns solid blue.
Connection Power Button
Indicator LED
English
0 2