VT Miltope nMAP Manual Del Usuario página 8

To reduce potential radio interference with other users, the antenna
type and its gain should be so chosen that the equivalent isotropically
radiated power (EIRP) is not more than that required for successful
communication.
This device is restricted to indoor use when using the 5.15 -
5.25 GHz band (Channels 36, 40, 44, and 48).
C. European Community
This device complies with the EMC Directive 2004/108/EC, Low
Voltage Directive 2006/95/EC and R&TTE Directive 1999/5/EC.
Compliance with these directives implies conformity to harmonized
European standards (European Norms) that are listed on the EU
Declaration of Conformity that has been issued by Miltope
Corporation for this device.
Countries of Operation and Conditions of Use
Requirements for indoor vs. outdoor operation, licensing and allowed
channels of operation apply in some countries as described below.
NOTE: The user/installer must use the configuration utility provided
with this device to ensure the channels of operation are in
conformance with the spectrum usage rules for EU and
EFTA countries as described below. If more than one unit is
deployed, users must ensure that frequencies are spread
among different channels according to channel availability.
2.4 GHz Operation

This device may be operated indoors or outdoors in EU and EFTA
countries using the 2.4 GHz band (Channels 1 through 13),
except where noted below.

In France, this device may use the entire 2400 - 2483.5 MHz
band (Channels 1 through 13) for indoor applications. For outdoor
use, only the 2400 - 2454 MHz frequency band (Channels 1
through 9) may be used. For the latest requirements, see
http://www.art-telecom.fr.
5 GHz Operation

This device requires the user or installer to properly enter the
current country of operation in the 5 GHz Radio Configuration
Window,

This device will automatically limit the allowable channels
determined by the current country of operation. Incorrectly
entering the country of operation may result in illegal operation
and may cause harmful interference to other systems. The user is
obligated to ensure the device is operating according to the
channel limitations, indoor/outdoor restrictions and license
requirements for each European Community country as described
in nMAP Wireless Access Point Operating Software Operator's
Manual M365-634.

This device employs a radar detection feature required for
European Community and EFTA country operation in the 5 GHz
band. This feature is automatically enabled when the country of
operation is correctly configured for any European Community or
EFTA country. The presence of nearby radar operation may result
in temporary interruption of operation of this device. The radar
detection feature will automatically restart operation on a channel
free of radar.

This device is restricted to indoor use when operated in EU and
EFTA countries using the 5.15 through 5.35 GHz band (Channels
36, 40, 44, 48, 52, 56, 60 and 64). See the table below for the
allowed 5 GHz channels in each band.
Frequency Allowed
Band (MHz) Channels
5150 – 5250 36, 40, 44, 48
5250 – 5350 52, 56, 60, 64
5470 – 5725 100, 104, 108,
112, 116, 120,
124, 128, 132,
136, 140
8
Maximum
Usage EIRP (mW)
Indoor use only 200
Indoor use only 200
Indoor or 1000
outdoor use