Troubleshooting - Hammerhead HLCL360 Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
The laser line
projection is weak.
The laser line is
hard to see.
Laser line is not
projected.
Laser line flickers
for alert.
14
CAUSE
Batteries are weak.
The tool is too far from
the target.
The surrounding is too
bright.
No batteries installed or
batteries are depleted.
The power switch is
not pushed to the "ON"
position.
The surface where the
tool has been placed is
uneven or the tool is out
of its automatic self-
leveling range.
SOLUTION
Replace with new batteries.
Move the tool closer to the
target.
Switch to the hand receiver
mode and find the laser
line with laser receiver
(available separately).
Install new batteries.
Slide the power switch to
the "ON" position.
Place the tool on a more
level surface (within ±4°).
Set the tool to its lock mode.
SELF-LEVELING 360-DEGREE CROSS LINE LASER