Manufacturer's Warranty; Spare Parts Lists - REMS Cento Instrucciones De Servicio

g
5. Behaviour in the event of faults
5.1. Fault:
Cause:
Feeding pressure too high.
Blunt/broken cutting wheel.
Worn carbon brushes.
5.2. Fault:
Cause:
Rollers (3) soiled.
5.3. Fault:
Cause:
Unsuitable cutting wheel.
Cutting wheel damaged.
5.4. Fault:
Cause:
Unsuitable cutting wheel.
Feeding pressure too high.
5.5. Fault:
Cause:
Worn carbon brushes.
Feeding pressure too high.
5.6. Fault:
Cause:
Rollers (3) of the pipe cutting machine and/or the roller insert (14) soiled.
Rollers (3) of the pipe cutting machine and/or the roller insert (14) damaged.
6. Disposal

7. Manufacturer's Warranty

prior interference in an unassembled condition. Replaced products and parts
The user shall be responsible for the cost of shipping and returning the product.

8. Spare parts lists

www.rems.de
Reduce feeding pressure.
Change cutting wheel.
Reduce feeding pressure.
Deburr pipe on the outside.
protect against rust.
Select and change cutting wheel according to the pipe to be cut.
Reduce feeding pressure.
Deburr pipe on the outside.
Change cutting wheel.
Select and change cutting wheel according to the pipe to be cut.
Reduce feeding pressure.
Reduce feeding pressure.
protect against rust.
Change rollers.
-
g