Facom DL.30 Guía De Instrucciones página 6

- Check that the supply hoses are neither damaged, nor bent, nor worn. Do not install any load below them, or place them near sources of heat or hit them. To ensure proper operation of the equipment or avoid any
breakage, the hoses must be as straight as possible, without twists, bends or sharp angles. Also ensure that the connection is made properly. Never disconnect a hose without depressurizing the system first.
- Use only original parts.
- Never modify a pit jack.
Symptom
Jack cannot lift load or pump feels spongy
Jack lift load, but cannot hold
Jack can not lower completely
Jack cannot reach maximum height
- If the pit jack is not used, fold the lifting arm completely to prevent any corrosion. If applicable, apply an anti-corrosion product to the piston.
- Store the pit jack in a dry and clean location, away from children.
- When the pit jack is not being used, drain the oil and hand the latter to an approved agent, then dispose the pit jack as per local regulations.
- To order the repair kit, comprising pit jack O-rings and pads, as well as all spare parts, please use the reference in the table.
GUARANTEE
Type D = 2 years. See the general conditions in the FACOM F13 catalogue or the FACOM price list.
6
Possible Causes
Release valve not tightly closed
Air-bound
Low oil level
Power unit malfunctioning
Low oil level
Power unit malfunctioning
Air-bound
Low oil level
Power unit malfunctioning
Air-bound
Low oil level
Remedies
Check if release valve stuck
Bleed hydraulic system
Add oil
Replace
Add oil
Replace
Bleed hydraulic system
Add oil
Replace
Bleed hydraulic system
Add oil