Vertex Standard VX-510 Manual De Operación página 8

VX-510 O M
PERATING ANUAL
C & C
ONTROLS ONNECTORS
( 4 ) A Button
Pressing and holding this button more than 2 seconds (but less than 4
seconds) also activates an assigned function (programmed by your dealer).
Pressing and holding this button more than 4 seconds causes the selected
channel to be assigned as the Priority Channel for use with Priority Scan-
ning and Dual Watch functions (explained later).
( 5 ) BUSY/TX Indicator
This lamp blinks green when a signal is being received (or the squelch is
opened by pressing the MON RES button) and red when transmitting. To
avoid interference, do not transmit if the lamp is glowing green. When the
battery almost depleted, this lamp blinks red, indicating that the battery
needs recharging or replacement very soon.
( 6 ) CH Rotary Selector
This rotary switch selects the operating channel. If a channel is selected
that is not available for operation, "- - - - - - - - - - - - - - - - - - - - " is displayed, accompanied by a
rapid warning beeper (2 beeps/sec.).
( 7 ) Antenna Jack
This threaded-type jack accepts the supplied flexible antenna. Any other
antenna types used here must be designed for the programmed operating
frequencies.
( 8 ) Liquid Crystal Display
In addition the channel number name, the display includes some operating
status symbols, indicated in the diagram below.
5