Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Playing back CD/SACD
1 Press [NWP
]/[CD
unit on.
2 Press [ ] on the unit to open the disc
tray and insert a CD.
Place label up in the proper position in the
middle of the disc tray.
DO
DO
12 cm CD
DO
DO
8 cm CD
• Press [ ] again to close the disc tray.
3 Press [
].
Note
• Be careful not to get your finger caught in the
disc tray when opening/closing it.
■
Repeat Playback
Press [CD].
Press [
].
"1
":
Only plays the selected track.
"
":
All tracks are repeated.
■
Random playback
Press [CD].
Press [RND].
• Press again to cancel.
■
Programme playback
Press [CD].
Press [PGM] in the stop mode.
• "Program Mode" screen is displayed.
Press the numeric buttons to select tracks.
• Repeat this step to make further selections.
Press [
] to start playback.
• Press [ ] or [ ] in the stop mode to check the
programmed order.
• Press [CLEAR] in the stop mode to clear the
last track.
• Press [PGM] in the stop mode to cancel the
programme mode, and the programme
memory will be stored.
• Press [ ] in the stop mode and select "Yes"
to cancel the programme mode. (The
programme memory will be cleared.)
] to turn this
DO NOT
DO NOT
DO NOT
DO NOT
Playback
Note
• The programme memory will be cleared in the
following conditions.
- When turning on/off this unit
- when replacing the CD
- when switching the layer
• The programme mode is cancelled when the
random playback is set.
■
Playing back Hybrid Super Audio CDs
Hybrid Super Audio CD discs include a
conventional CD layer along with the Super
Audio CD layer. Although Super Audio CD layer
is preferentially played back, you can select the
CD layer or Super Audio CD layer for playback by
pressing [CD] while the playback stops.
Note
• The layer cannot be selected on the disc except
Hybrid Super Audio CD discs.
■
Decoding MQA-CD
This unit includes the MQA (Master Quality
Authenticated) technology, which enables
playback of MQA audio files and streams,
delivering the sound of the original master
recording.
To deliver the master quality audio of an MQA-
CD, MQA decoding function needs to be set
to "On". Switch the MQA decoding function to
"On" or "Off" in the following steps.
• The default setting is "Off".
Press and hold [RE-MASTER] for approx.
2 seconds or longer.
• "MQA Decoding : On" is displayed and the
MQA decoding function is set to "On". (Press
and hold for approx. 2 seconds again to set
the function to "Off".)
Play back the MQA-CD.
■
Compatible CD
• A disc with the CD Logo.
• This unit can play back discs that conform to
the CD-DA format.
• The unit may not be able to play some discs due
to the condition of the recording.
• Before playback, finalise the disc on the device
it was recorded on.
■
CDs that cannot be used
• CDs with irregular shapes, such as heart shapes
(Use of such CDs may cause malfunction.)
Basic
17
(17)
Tabla de contenido
