Tabla de contenido
Idiomas disponibles
Idiomas disponibles
MULTI
I
5 *
._ J
In the programmed
edit recording
function
the tracks
can be
programmed
while checking
the remaining
time on each side of
the tape.
The programmed
edit recording will not start from a point halfway
in the tape. The tape must be recorded
on from the beginning
of
either side.
1
2
3
4
,5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
Press CD and load the disc(s).
Press CD EDIT/CHECK twice.
When using the remote control, press CD
EDIT/CHECK
twice
while pressing
SHIFT.
"EDIT
and "PRGM" are displayed.
* When "Al" is displayed,
press
CD EDIT/CHECK
again.
Press numbered buttons on the remote control
to designate the tape length.
10
to 99 minutes can be specified.
o The ++,
*
or
MULTI JOG
are also available to designate
the tape length,
Tape length
Tape side A (front side)
Maximum
recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered
buttons O-9 and +1 O on
the remote control to program a track.
Example:
To select
the 10th track
of disc 2, press
DISC
DIRECT PLAY 2,
then press
+10
and 0.
Remaining
time
Programmed
!Selc!cted track number
on side
A
tracks
6
7
8
Repeat step 5 for the rest of the tracks for side
&
A.
[
:,,,"::
A track whose playing time is longer than the remaining
time
!,; '?
cannot be programmed.
-"!j -::
J.:w
,,. ,. ,,.
Press CD EDIT/CHECK
to select
side B and
~TI~
program the tracks for side 13.
After confirming
"B" on the display, repeat step 5.
Tape side B (reverse side)
Press the
REC/REC
MUTE button to start
recording.
The tape is rewound
to the beginning
of the front side, the
lead segment
is played through for 10 seconds, and recording
starts.
When recording
on the front side (A) ends, recording
on the back side (B) starts.
To stop recording
Press
. Recording
and CD play stop simultaneously.
To check the order of the programmed
track numbers
Before recording,
press
CD EDIT/CHECK
to select side A or B,
and press ++
or
-
repeatedly.
Programmed
track
Disc number
Track number
numbers
Tape side
Program
number
To change the program of each side
Press
CD EDIT/CHECK
to select
side A or B, and press
CLEAR
to clear the program on the selected
side. Then prc]gram
tracks again,
To clear the edit program
Press I
CLEAR
twice so that "EDIT
disappears
on the display.
Up to 30 tracks can be programmed
from any of the inserted
discs.
c "FUL12 is displayed
if you attempt
to program
more than 30
tracks.
Recording
is inhibited
if the erasure
prevention
tab on either
side of the tape is broken off.
Program
number
ENGLISH
23
Tabla de contenido
