Denver IPC-1300 Guia De Incio Rapido página 288

IPC-1300 Quick Start Guide
STEP 2.Reset IP Camera
Connect the power supply with the IP Camera and wait for around 2 seconds the red indicator
always Light .And 10 seconds later the red indicator will off, then the IPC detection by itself.
Another 5 seconds later the red indicator always Light again.
After 10 seconds, the blue indicator Will flashing fastly, you need to RESET the camera. The
method is to press the RESET button at the back of the camera by a proper small tool such as a
pin, more the 4 seconds then release. The red indicator and blue indicator flashing alternately,
Reset successful, you can continue to the next step.
iOS / 4-EN