Brother TD-4000 Guia Del Usuario página 19

5
Position the end of the RD roll to
touch the black plastic cutter guard.
6
Close the RD Roll compartment cover.
7
Press and hold the ON/OFF button ( ) to turn the TD-4000/4100N
on.
Die cut label
8
Press the Feed button.
The printer will position the label to the correct starting position.
You are now ready to print.
Continuous length label
8
Press the Feed button twice and the Cut button.
The printer will position the label to the correct starting position.
You are now ready to print.
If the media does not load properly, trim off some of the media to produce straight
edge and repeat this loading procedure.
13
Black plastic
cutter guard
STEP
1
STEP
2
STEP
3