Facom E.6000 Manual Original página 8

Sensor Selection
FACOM provide a full range of sensors to cover a wide range of torque values. An appropriate sensor should be selected
to ensure the maximum sensor range exceeds the maximum value of the wrench being tested. For greatest accuracy
choose the sensor closest to the desired test value.
For Surface Mounting
Can be mounted vertically or horizontally.
Hole centres – (refer to drawing)
Note – ensure surface is secure enough to support the applied torque.
For CD.12A Mounting
Sensor should be mounted vertically.
Ensure fastening screws are tightened to the relevant torque (see speci cations).
3. SPECIFICATIONS
REF Torque
Range
E.6000-C1000 10-1000Nm
E.6000-C400 20-400Nm
E.6000-C50 5-50Nm
E.6000-C30 1-30Nm
E.6000-C5 0,5-5Nm
E.6000-C12 0,04-1Nm
REF
E.6000-C1000
E.6000-C400
E.6000-C50
E.6000-C30
8
NU-EC6000_0717 ttes langues.indd 8
CW
External Drive
Dimensions Square
(LxWxH)
(mm)
160x105x108
145x92x92
105x65x80
105x65x80
105x65x80
105x65x80
RANGE
Low High
10 1000
20 400
5 50
1 30
CCW
Hole Centres
for mounting (Class 12.9)
(") (mm)
3/4 " 114
1/2 " 100
3/8 " 70
1/4 " 70
1/4 " 70
1/4 " 70
ACCURACY
1% 0.50%
10-99 100-1000
20-39 40-400
N/A 5-50
1-2 3-30
Screws Mounting
Hole Centres
M14 Ø15
M12 Ø13
M8 Ø9
M8 Ø9
M8 Ø9
M8 Ø9
Screw
Tightening
Torque
120 N.m
100 N.m
40 N.m
40 N.m
40 N.m
40 N.m
12/07/2017 16:55:27