Zombi ZST5817 Manual Del Operador página 7

REWINDING SPOOL FROM BULK LINE
(USE ONLY .080" DIAMETER LINE)
Bulk line for your trimmer is available at extra cost from your local
dealer. To install bulk line, follow these steps:

Turn off the trimmer and remove the battery.

Cut line to a length of 14.7 feet.

Press the release tabs on the line spool cover as shown in Fig.
1, and remove the spool by pulling it straight off. Remove and
discard all line on the spool.

Rotate the spool knob so that the 2 holes in the spool hub are
aligned with the holes in the 2 metal eyelets.

Insert the line through all four holes. Pull the line until there is
an equal length of the line on each side of the spool. (See Fig.
2)

Turn the spool knob in a clockwise direction (see arrows on the
top of the knob) until the line is wound to the proper cutting
length. (See Fig. 3)

Install the spool back into the spool cover making sure it is
firmly locked in place. (See Fig. 4)
OPERATING
Release tab
Fig.1
Line
Fig. 2
7
Spool knob
Fig. 3
Fig. 4