Brief Introduction - NGS vintage artica Manual De Usuario

USER'S MANUAL
Welcome to use this Bluetooth stereo headset. Please read this user's manual
carefully before using it.

BRIEF INTRODUCTION

VINTAGE ARTICA NGS is a stereo Bluetooth headset. It supports the following
Bluetooth profiles:
HSP: Headset Profile
HFP: Hands-free Profile
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
BEFORE USING
OVERVIEW
1 LED Indicator
2 Button 1: Power ON/Off, Pause,
Play, Pairing
3 Button 2: Vol+ / Next
4 Button 3: Vol- / Back
5 Mini USB to charge
6 MIC
ON OR OFF
1~3-second press
The Blue LED will flash for 3 seconds,
that means the device is ON or OFF.
2
1
3
2
4
5
6
BASIC OPERATION OF HEADSET
Function Multifunction LED status
Power on Blue flash 3secs
Power off Blue flash 3secs
Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures may vary with different mobile phone. Please refer
to your mobile phone manual for further information. Steps as follows:
1. Please keep the headset and mobile phone in the range of 1 meter when
pairing.
2. Press and hold Button 1 "3 Sec" until the headset's LED light alternately
flashes blue.
3. Start the Bluetooth function of mobile phone and search the Bluetooth
devices. After searched, select "VINTAGE ARTICA NGS"in the Bluetooth device
list.
4. According to indication, enter password or PIN No:"0000",and press the key
of" Yes" or "confirm.
5. After successful pairing, select "VINTAGE ARTICA NGS" in the Bluetooth
device list, and press "connect".
6. After successful connecting, the blue LED of the headset quickly blinks twice
or three times every 4 seconds.
7. Your headset now is connected.
Button Operating
Button 1 3 second Press
Button 1 3 second Press