Scope Of Delivery - Kostal PIKO 1.5 MP Manual De Instrucciones

Short Manual
3.3. Safety
This document must be read and understood in full before installing and/or

using the device.
Connection, commissioning and repair may only be performed by a qualified

electrician who is specially trained in solar technology.
If one of the following components is damaged, immediately take the device

out of operation and disconnect it from the grid and solar modules:
­
Device (not functioning, visible damage, smoke, penetration of liquid etc.)
­
Cables
­
Solar modules
Do not switch on the system again until it has been repaired and checked by a

suitably qualified and authorised technical specialist.
Dangerous voltages can remain present on the components up to 10 minutes

after switching off the DC circuit breaker and the line circuit breaker.
Warning, there are 2 voltage sources present: the power grid and the solar

modules.
Disconnect both voltage sources from the device before working on the
device.
Do not cover the device.

The factory-applied labels on the device must not be modified or removed.

Do not open the device.

Keep children away from photovoltaic systems.

Follow the general and national safety and accident prevention regulations.

This document must be stored safely and be available for the entire service life

of the device and must be passed on to any subsequent user.
3.4. Signs and labels on the device
3.5.

Scope of delivery

1x 1x
06/2016 | DOC01666746 | KOSTAL Short Manual PIKO 1.5 - 4.2 MP
1. Safety label with warning notices
2. Type plate with the main technical data and serial number
When connecting external components (e.g. data logger): be sure
to observe the manufacturer's instructions. Incorrectly connected
components can damage the device.
Incorrect operation or settings, especially during the initial
commissioning process, can reduce the yields of the system
1x 1x 1x
DE
DA
EN
ES
FR
GR
IT
NL
PL
PT
TR
TR
21