Mopping Mode (H2O Tank); Vacuum Mode (Dust Bin) - Amibot Spirit ICE Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
Operating the appliance
NOTE:
Before using the robot for the first time, you must charge it for at
least 12 hours. It will only need to be charged for between 250 and
350 minutes thereafter.
The robot must be switched on while it is being charged.
The robot is charging when the orange AUTO light flashes slowly.
If the robot is not in its home base and inactive, it goes into standby
after 10 minutes.
If the battery is weak while the robot is cleaning, it returns to its home
base. The home base must therefore be switched on.
If the robot is not used for a long period of time, you are
recommended to fully charge the battery, switch off the robot and
store it in a cool, dry place.

Vacuum mode (dust bin)

To use the vacuum mode, attach the dust bin to the back of the
appliance.
12
Operating the appliance

Mopping mode (H2O tank)

Attaching the cleaning pad
Figure 2
Figure 1
Attach the cleaning pad (Figure 1) to the H2O tank using the Velcros
on the underneath (Figure 2) then attach each side to the cleaning
pad supports (Figure 3).
Preparing the H2O tank
NOTES:
The H2O tank has a maximum capacity of 300ml. For optimum performance, it
must have at least 50ml of liquid.
For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
Only use floor cleaner products. Prolonged use of any other product, such as
white vinegar, black soap or bleach, could damage the H2O tank.
EN
Figure 3
Open the H2O tank's refill nozzle
and carefully pour in clean water
with some floor cleaner.
13
Tabla de contenido

Solución de problemas

loading

Tabla de contenido