KS BAIONA Serie Manual De Instalación Y Funcionamiento página 5

INSTallaTION
STEP 4 – cONNEcTINg ThE POwER SOuRcE
Connect the waterproof
connector coming from
1
the electronic unit to the
solenoid valve connector.
FOR BIONA BATTERY VERSION:
a. Install the battery box
slide on holder, on the
wall underneath the sink
using the two screws and
anchors provided.
2
b. Connect the waterproof
connector coming from
the electronic unit to the
battery box.
6
FROM THE ELECTRONIC uNIT TO THE SOLENOID VALVE
FROM THE ELECTRONIC uNIT TO THE BATTERY BOx
INSTallaTION
FOR BIONA TRANSFORMER VERSION:
a. Connect the waterproof
connector coming from
the electronic unit to the
transformer.
2
b. Plug the transformer into
the electricity socket.
IMPORTaNT: Wait 10 seconds before
operating the system.
If the range is unsatisfactory, refer to the section titled "Settings
3
adjustment" .
This faucet includes a special
aerator that allows you to
adjust the water stream
direction on site in order to
NOTE prevent water splashing if
needed. To change the angle of
the water stream, simply move
the adjustable tilting plate by
pressing it smoothly.
FROM THE ELECTRONIC uNIT TO THE TRANSFORMER
SECONDS
7