Tabla de contenido
Connecting one iX8044 & two Controllers - UDP SETUP
To control one iX8044 product with two external controllers thru a LAN connection, do the following UDP settings:
NOTE: Make sure to configure all of your connections in UDP mode.
Controler #1
RKD 8044-T
Local address
Remote address
Local port
Remote port
In the "CONTROL" – "iX LAN SETUP" menu of the iX8044 configure the connection in UDP mode as described here
above.
Choose IP addresses according to the available addresses on your local network.
Now on each controller, configure the UDP connections as described here above.
RKD8044-T
PAGE 8
Local address
Remote address
Local port
Remote port
Gateway
Netmask
192.168.0.15
192.168.0.10
10500
10500
Diventix 8044
192.168.0.10
192.168.0.255
10500
10500
192.168.0.1
255.255.255.0
LAN HUB
Straight Cables (Cat5 RJ 45)
Controler #2
(ie
AMX /CRESTRON
Local address
192.168.0.16
Remote address
192.168.0.10
Local port
10500
Remote port
10500
RKD8044-T
)
Tabla de contenido
