Review Test Results In Memory - Nova Max PLUS Guia Del Propietario

Review Test Results in Memory

NOTE: If a test strip is inserted while in the Data Review mode, the
monitor immediately switches to test mode.
To review test results that are stored in memory, start with the monitor
in the off position. The monitor is in the off position when the screen is
completely blank. To turn off the monitor, hold the Mode
down until the screen goes blank then release the button.
1. With the monitor off, press the Mode
button. The most recent test result should
display. If there are NO results in memory,
the screen displays 3 dashes.
2. Press the Left/Right
view all the data in memory. The Left arrow
goes back in time and the Right arrow goes
forward in time. All results including control
results, marked results, and unmarked results
can be viewed.
3. At the end of reviewing individual test re-
sults, the screen displays "End Mem. "
NOTE: When the monitor memory is full (400 test
results), each new test result stored in memory will
remove the oldest test result stored in memory.
Nova Max Plus Monitor OG PN46171D1 EN.indd 35
button to
button
35
9/5/12 3:22 PM