Sharp MX-B350W Guía De Inicio página 5

Near a wall
Be sure to allow the
required space around
the machine for servicing
and proper ventilation.
(The machine should be
no closer than the
distances indicated below from walls.)
Locations subject to vibration.
Vibration may cause failure.
• The machine should be installed near an accessible
power outlet for easy connection.
• Connect the machine to a power outlet which is not
used for other electric appliances. If a lighting fixture
is connected to the same outlet, the light may flicker.
About consumables
CAUTION
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
Store a toner cartridge out of the reach of children.
Handling precautions
WARNING
Do not place a container of water or other liquid, or a
metal object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine,
fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause
electrical shock.
Do not make any modifications to this machine.
Doing so may result in personal injury or damage to
the machine.
Do not use a flammable spray to clean the
machine.
If gas from the spray comes in contact with hot
electrical components or the fusing unit inside the
machine, fire or electrical shock may result.
If you notice smoke, a strange odor, or other
abnormality, do not use the machine.
If used in this condition, fire or electrical shock may result.
Immediately switch off the main power and remove
the power plug from the power outlet.
Contact your dealer or nearest authorised service
representative.
30cm
Machine
15cm
30cm
If a thunder storm begins, switch off the main power
and remove the power plug from the outlet to prevent
electrical shock and fire due to lightning.
If a piece of metal or water enters the machine,
switch off the main power and remove the power
plug from the power outlet.
Contact your dealer or nearest authorised service
representative. Using the machine in this condition
may result in electrical shock or fire.
CAUTION
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine.
Do not install the machine in a location that will
block the ventilation ports.
Blocking the ventilation ports will cause heat to build
up in the machine, creating a risk of fire.
The fusing unit and paper exit area are hot. When
removing a misfeed, do not touch the fusing unit
and paper exit area. Take care not to burn
yourself.
When loading paper, removing a misfeed,
performing maintenance, closing the front and
side covers, and inserting and removing trays,
take care that your fingers are not pinched.
If voltage fluctuations exceed the allowed range, the device
may stop.
ENVIRONMENT
Information on Disposal
Information on the Disposal of this
Equipment and its Batteries
IF YOU WISH TO DISPOSE OF THIS
EQUIPMENT, DO NOT USE THE
ORDINARY WASTE BIN, AND DO
NOT PUT THEM INTO A FIREPLACE!
Used electrical and electronic
equipment and batteries should always
be collected and treated SEPARATELY
in accordance with local law.
Separate collection promotes an
environment-friendly treatment,
recycling of materials, and minimizing
final disposal of waste. IMPROPER
DISPOSAL can be harmful to human
health and the environment due to
certain substances!
Take USED EQUIPMENT to a local,
usually municipal, collection facility, where available.
This equipment contains a BATTERY which cannot be
removed by the user. For battery exchange, please contact
your dealer.
Users from PRIVATE
HOUSEHOLDS are
requested to use
existing return
facilities for used
equipment. Return is
free of charge.
3