Ceiling ducting
If the duct will vent straight up to the ceiling:
Use level to draw a line straight up, from the centerline on the template to the
•
•
Measure at least 4 -12/16 " from the back wall to the circle center of an 6-½" hole on the ceiling.
Wall ducting
If ductwork will vent to rear:
Use a level to draw a line straight up from the centerline on the
•
Measure at least 23 - 12/16" (the measure might vary dependig on the elbow used) above the pencil
•
line that indicates the bottom installation height, to the circle center of an 6-½" diameter duct hole
(Hole may be elongated for duct elbow).
House wiring location
•
The junction box is located on the top left side of the
Wiring should enter the back wall at least 20" above the bottom of the installation height, and within
•
5-7/8" and 4-7/8"of the left side of the centerline.
6
template.
hood.
17
ceiling.