Faucet Installation - Conglom QL014K Manual Del Usuario

Installation (continued)

FAUCET INSTALLATION

- Connect the sprayer head (1) to the sprayer head
connector (2).
- Remove the gasket (3), metal washer (4), and retaining
nut (5) from the mounting shank of the faucet.
- Insert the faucet hose and the mounting shank through
the faucet hole in the sink and rest the faucet on the
sink .
- From underneath, secure the faucet to the sink with the
gasket (3), metal washer (4), and retaining nut (5).
- Tighten the retaining nut (5) by hand until it is snug.
Use a wrench to tighten it down . Gently tighten the two
screws on the retaining nut . Do not overtighten .
- Connect the main water supply outlet (6) to the sprayer
hose (9) using the quick connector (7) as shown.
Connect the male quick connector fitting (8) to the
female quick connector fitting (7) until it locks. Lightly
tug on the quick connect fittings to ensure they are fully
engaged .
- Fully retract the sprayer hose (9). Install the
counterweight (10) about 2 in. (50 mm) from the bottom
on the side closest to the
sprayer head (1). There should be no slack in the hose
and it should retract freely .
- Attach and hand tighten the supply lines (not supplied)
onto the faucet inlet fittings. Use two wrenches to
tighten the two ends together .
NOTE: Failing to use two wrenches can damage the
faucet and void the warranty. Do not overtighten.
It is helpful to have a second person hold the faucet in
place while tightening the mounting nuts.
Please ensure that none of the supply lines are kinked
during installation.
QL014K
Faucet body
Gasket (3)
Retaining
Nut (5)
Hot / Cold
Supply Lines
Supply Line
Inlet Fittings
Counterweight (10)
QUICK CONNECTOR
10
Spring
Sprayer Head
Connector (2)
Sprayer
Head (1)
Mounting
Shank
Metal
Washer (4)
Screws
Main Water
Supply Outlet (6)
Female Quick
Connector Fitting (7)
Male Quick
Connector Fitting (8)
Sprayer Hose (9)
Supply Line
Inlet Fittings
1/2" NPS thread
Female Quick
Connector
Fitting (7)
Male Quick Connector
Fitting (8)
1/2" FIP
Water Supply
Line Compatible
Fig . 9