Cedar Ridge CRHSD25RTA Manual De Instalación Y Funcionamiento Del Propietario página 19

Key Settings
ON - Operates unit to on position, manually
operated solenoid ON.
OFF - Operates unit to off position, manually
operated solenoid OFF.
MODE - Changes unit from manual mode to
thermo mode.
SET - Sets temperature
in thermo mode.
Figure 21 - Remote Control
LCD Liquid Crystal Display
1. DISPLAY Indicates CURRENT room
temperature.
2. °F or °C Indicates degrees Fahrenheit or
Celsius.
3. FLAME Indicates burner/valve in operation.
4. ROOM Indicates remote is in THERMO
operation.
5. TEMP Appears during manual operation.
6. SET Appears during time the of setting
the desired temperature in the thermo
operation.
1
4
ROOM SET TEMP
Figure 22 - Remote Control Display
200125-01B
OPERATION
TEMP
2
3
5
6
www.usaprocom.com
Setting°F/°C Scale
The factory setting for temperature is °F. To
change this setting to°C, press the ON key
and the OFF key on the remote control at the
same time (see Figure 21). This will change
from°F to °C. Follow this same procedure to
change from°C back to°F.
Manual Function
To operate the system in the manual "MODE"
do the following.
ON OPERATION
Press the ON key and the appliance flame will
come on. During this time the LCD screen will
show ON (see Figure 23).
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (see Figure 23). The flame icon will
appear on LCD screen in manual on mode.
Figure 23 - Manual Mode in ON Operation
OFF OPERATION
Press the OFF key and the appliance flame
will shut off. During this time the LCD screen
will show OF (see Figure 24).
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (see Figure 24).
Figure 24 - Manual Mode in OFF Operation
TEMP
TEMP
TEMP
TEMP
19