Introduction; Heart-Rate Monitor; Important; Cadence Sensor - Elite DIGITAL ANT Instrucciones Para El Uso

EN
Thank you for purchasing the Cube
Digital
The Cube Digital is a training roller that will help
you improve your performance thanks to the use
of specific training modes. With the cycle compu-
ter you can display your instantaneous, average
and maximum data at any time. And thanks to an
intuitive interface , you can customise your trai-
ning according to your ability.
as this can permanently damage roller and tyre.
to wait until it cools before touching the flywheel

HEART-RATE MONITOR

The Cube Digital has an internal receiver for
heart-rate monitors with chest strap. This ena-
bles the rider's heart-rate to be measured and
shown on the screen during the race. The heart-
rate monitor does not come with the product.
The heart-rate monitor receiver of the Cube
Digital is compatible with all ANT+ type transmit-
ters.
18

INTRODUCTION

• Do not brake when using the trainer,
• The resistance unit heats up considerably
when in use. Therefore make sure

IMPORTANT

The Cube Digital roller does not use a sensor for
measuring the cadence. This is possible thanks
to a sophisticated calculation based on the
speed. Since this is not a direct measurement,
but the result of a calculation, in particular situa-
tions the cadence value may not be accurate.
If a more precise measurement is required, an
optional cadence sensor can be connected to the
roller. Contact Elite srl ([email protected])
for further information .

CADENCE SENSOR