Overview - ROHO Smart Check Operación Manual

Overview

This page explains how to use Smart Check to find,
save, and check your cushion inflation setting.
Please read before using Smart Check.
Smart Setup and Check:
1. Follow the S S I
mart etup nStructIonS
find and save your cushion inflation setting for you.
2. Follow the c I
heck nStructIonS
Button, Smart Check will tell you if you need to adjust
your cushion.
Optional Setup is an alternative to Smart Setup.
Optional Setup may be preferred in the following situations:
- A qualified seating specialist has determined an alternate immersion and envelopment level for the
individual.
- The individual must accommodate needs (such as severe asymmetrical posture) that are beyond the
immersion and envelopment setting found by Smart Check during Smart Setup.
- The cushion is being used on an upholstered surface (such as a Captain's Seat).
Warnings:
• It is recommended that a qualified seating specialist be consulted when saving a preferred cushion
inflation setting with Optional Setup.
• Optional Setup should not be used if the individual weighs less than 90 lbs. (40 kg).
Optional Setup (and Check)
1. Find your preferred cushion inflation setting without using Smart Check. (Follow the ROHO
Compartment Cushion with Sensor Ready
.)
Operation Manual
2. Follow the o S
ptIonal
3. Follow the c I
heck nStructIonS
your cushion.
IMPORTANT!
• Perform Setup (either Smart Setup or Optional Setup) when using Smart Check for the first time.
• Perform Smart Setup or Optional Setup again if the following changes occur: 1) a different individual is
using Smart Check; 2) a different chair or a different cushion is being used; or 3) the individual experiences
physiological changes (for example, weight loss or weight gain). Before performing a new Setup, you must
clear your Smart Check setting; see h
• Perform a Check frequently, at least once a day!
Smart Check by ROHO Operation Manual
. Smart Check will
. When you press the Check
Technology Operation Manual or the ROHO
®
I , using Smart Check to save your inflation setting.
etup nStructIonS
. When you press the Check Button, Smart Check will tell you if you need to adjust
r
ard eseT
Proper Cushion Inflation Setting: A) sink down into the
cushion and B) "float" above the cushion base.
B
i .
nsTrucTions
6
A
Single
®
Hybrid Elite Cushion
® ®