CANGAROO FOCUS Instrucciones De Uso página 17

4.Two-communication:. Generally, the camera transmits sounds and images to the parent unit. If you wish to use the talk
– back function, press and hold the TALK button, and in the top of the screen the mic icon will be displayed.
Your voice will sound from the speaker of the camera, which you placed in the baby room. In the main menu and the
SHORT-CUT the talk back function is not available.
5. Camera adjustment settings: you can do it remotely using the keys on the parent unit.
•Hold the left  button and the baby unit will rotate to the left until you remove your finger from the button.
•Hold the right  button and the baby unit will rotate to the right until you remove your finger from the button.
•Hold the up ▲ button and the baby unit will turn up until you remove your finger from the button.
•Hold the down ▼ button and the baby unit will turn down until you remove your finger from the button.
6.Zoom option: Press the OK button to zoom the image twice. And the magnifying glass icon will appear on the
screen. Press the OK button again, the image will return to normal. The default setting is the image to be in normal scale.
7.Night light option: Press the night light button on the parent unit to turn on the night light on the camera. The icon for
night light will appear on the screen. Press the night light button again to turn it off, and the icon will disappear.
8.Display:
•Signal strength
: 5 levels of strength, higher level means stronger signal.
•Battery status: Shows the current battery status. Condition: full charge, 3/4 charge, 2/4 charge, 1/4 charge, low battery.
Charging time: 8 hours with the provided charger.
9.Low battery indicator: When the parent unit battery charge is low (below 20%), the low battery icon will be displayed
on the screen. When the battery charge is less than 10%, the flashing red battery icon will be displayed, meanwhile an
alarm will sound every 3 seconds until the parent unit turns off automatically.
10.Automatic night vision: The baby unit has 7 high-intensity infrared LEDs for clear images in the dark. When the built-in
photo sensor on the top of the device detects a low level of ambient light, the LEDs will be activated automatically. The
real-time image on the parent unit screen will be displayed in black and white. The moon icon will appear at the top
of the screen.
MAIN MENU ON THE RECEIVER
Press the MENU key and on the screen the main menu will be displayed.
1.Adjusting the sound level:
•Press the MENU key. After that, press the left or right key (&), until you reach the sound icon. Press the up and down
buttons (▲&▼) to choose the preferred sound level.
•Or you can press the SHORT – CUT key. Then press the up and down button (▲&▼), to increase or decrease the sound
level.
2.Brightness
•Press the MENU button. After that press left and right key (&), until you reach the brightness icon. Press the up or
down button (▲&▼) to select the preferred brightness level (8 levels of brightness).
•Or you can press SHORT-CUT key. After that, press the left or right (&) button in order to select the level of
brightness.
16