Busse COLMAR Indicaciones Para El Usuario página 4

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
EN |
Instructions for use and tips for the user
This is a riding helmet in accordance with
VG1. 01.040 2014-12 and so is not approved for
other sports.
In order to ensure your personal protection with the
riding helmet, please read through these instructions
for use carefully. This helmet will only protect you
from physical injury if the instructions are followed
100% with regard to helmet size / adjustment of the
strap system.
Instructions for use
a) Helmet size
Choosing the correct helmet size gives maximum
protection. Please take the necessary time when
choosing, and make sure the helmet sits correctly.
The helmet must fit snugly, but should not exert
pressure. When properly adjusted and fastened,
it should not be loose or able to be removed.
It is particularly important to choose a helmet which
is also suitable for children. Avoid choosing a helmet
which is too large for "growing into".
b) Size adjustment
This helmet is equipped with a system for adjusting
to fit the head. Put on a helmet of the correct initial
size and turn the small wheel on the back of the
helmet, to loosen or tighten the fit. Please note the
helmet must be tight, but nonetheless comfortable
to wear.
tighten
loosen
c) Adjusting the strap system
Put on the helmet and pull the strap through
the buckle. Pull on the strap until you feel light
resistance.
To open and close the quick release fastener please
see the illustration below.
When you have adjusted the fit properly, adjust the
side and chin strap as illustrated. They should sit
firmly, but not be constrictive.
d) Cleaning and care
Never use the following on the helmet: powerful
detergents, solvents (e.g. cleaning fluid, acetone,
trichloroethylene etc.), or paints, adhesives, or
products containing petrol: these can destroy the
surface of the helmet. To clean the helmet, use warm
water and mild soap. Allow the helmet to dry slowly.
The inner lining is removable and can be washed
separately up to 30°C. Keep the helmet in a cool,
dry place out of direct sunlight. Do not expose the
helmet to extreme heat or cold for longer periods of
time. When transporting the helmet, please ensure
the helmet is adequately protected from y accidental
collision (fall). If the helmet falls, even from a low
height, this can destroy the helmet skin and make it
unusable. We recommend you transport the helmet
in a padded helmet carrier in order to minimise the
risk of this kind of damage.
loading

Productos relacionados para Busse COLMAR