Operation; Central Heating; Changing Temperature Setting - VULCANO Control Connect Manual De Instalación Y De Funcionamiento

▶ Select the required Wi-Fi network.
If the Wi-Fi network is password-protected:
▶ Input the Wi-Fi network password when the Wi-Fi network
is password protected. Connecting and synchronising can
take some time.
The controller uses the standard Wi-Fi protocol,
do not use any $-signs in your Wi-Fi router
password.
▶ If necessary, remove the $ sign from your
router password.
02.13.00
1
Fig. 10 Connecting to the Wi-Fi network and internet
If the required Wi-Fi network is not found:
▶ Press the "back" key ( fig. 9, [5]) to set the controller to
the off-line mode.
Now the temperature can only be set manually on the
screen.
▶ Connection to the app or controller web-site is not
possible.
▶ Press the 1 key ( fig. 9, [4]) to search again.
See section 7.3.3, page 32 for possible
solutions to connection problems.
Connecting to the internet
02.13.00
1
Fig. 11 Connecting to the Wi-Fi network and internet
Control Connect – 6720818270 (2016/02)
02.13.00
2
02.13.00
2
• If all connections are made, the data is synchronised.
• The display will now show the basic screen.
20
Fig. 12 Basic screen
▶ Download the controller app to your smart device from
either:
▶ Make a connection to the controller from your smart
device.
▶ Register the app with the controller website.
▶ Enter the unique access code ( label on the front page).
▶ Set a personal password, of your choice, and record this on
the front of these operating instructions.
5

Operation

The touch screen is intended for limited manual operation, for
all other operations and programming the app on your smart
device must be used.
5.1

Central Heating

5.1.1 Changing temperature setting

21
20
20 0
Fig. 13 Tap
Operation
5
0
5
0 0
29