Alecto BDM-50 Manual De Instrucciones página 43

"Err 1" is shown on LCD panel:
- Deflate too fast. Please send it to service point
"Err 2" is shown on LCD panel:
- Movements occur on wrist. 1.Keep still after you
push the Start button. 2.Other interference signal
around BDM-100. Please remove interfering sources
such as Magnetic material or cell phone.
"Err 3" is shown on LCD panel:
- Incorrect measured result. 1.The cuff might place
incorrect. Please re-wrap the cuff in correct position.
2.You might use it incorrectly, such as measure
pressure value on child.
If correct measurement is impossible even after chec-
king the above-mentioned points, consult at the store
where you have purchased the unit or the nearest dea-
ler without touching the internal mechanism.
In some cases, there may be error due to the physical
condition of the person. In such cases, please consult
your doctor.
43
43