HTW FREYA Manual De Usuario E Instalacion página 22

STEP 4: Unscrew 2pcs M5 screws and washers preassembled in Support Bar
– Lower (24).
Insert Support Bar-Upper (21) to Support Bar-Lower (24) and fix the
connection using 2pcs screws and washers .
Repeat this step and connect other 3 sets support bars.
STEP 5: Attach Flame Screen (16) to the top of Support Bar-Upper (21) and fix
the connection using 2pcs M5 screws and washers (See FigureⅠ, Ⅱ).
Repeat this step and connect Flame Screen (16) to other 3 sets Support
Bars-Upper. (See Figure Ⅲ, Ⅳ)
STEP 6: Place Aluminum cover (17)
on the Flame Screen (16) and fix the
connection using 4pcs M5 CAP NUT.
20