Ef-4000 Transmitter; Ef-4000 Receiver Collar - Dogtek EF-4000 Guía De Uso

7

EF-4000 TRANSMITTER

Potentiometer for
setting the warning zone
Diagram 2
EF-4000 Transmitter
TURNING THE TRANSMITTER ON / OFF
• Connect to the power source to turn the transmitter on. The light indicator will turn blue. See diagram 2.
• Disconnect the transmitter from the power source to turn it off. The blue light will turn off. See diagram 2.
NOTE: Connect the transmitter to the wire before turning it on. Otherwise, the transmitter will emit a beep
to inform you of a connection failure.

EF-4000 RECEIVER COLLAR

Diagram 3
EF-4000
Receiver Collar
Button for
adjusting
stimulation
intensity
(beeps)
Blue indicator light
showing transmitter is 'on'
Antenna socket
Diagram 4
EF-4000
Receiver Collar
Battery position
Install or replace the battery
To intall or replace your collar battery, proceed
in the following way:
• Unscrew the 4 screws on the battery cover
• Insert the battery (CR2) in the position indicated
Switch for setting
the stimulation zone
Connection to
power unit
contact points