PERIODIC CLEANING
Beginning with the initial installation, the interior surfaces of the cabinet and topping well
should be periodically wiped down with a solution of warm water and baking soda. This
solution will remove any odors that may occur as a result of spillage. The exterior of the
cabinet should also be cleaned frequently with a commercial grade of glass cleaner. The
plastic "safe edging" material should be removed periodically and cleaned in a sink with
soap and water, dried, and replaced on the unit. Caution: Do not use any abrasive or
alkaline solutions to clean the cabinet.
Important: Monthly cleaning of the condenser coil will aid the heat transfer characteristics
of the refrigeration system and keep it operating at top efficiency. The condenser coil i s
located inside the cabinet and can be accessed by removing the condenser cover. The
condenser cover has a label identifying it and reminding the user to clean the condenser
coil monthly. Failure to keep the condenser coil clean could result in temperature loss
and damage to the compressor.
Disconnect the power before cleaning the condenser coil to prevent injury. Remove the
condenser cover and use a soft brush to loosen the lint and dirt attached to the fins. After
this has been accomplished, use a vacuum cleaner to remove the loosened particles.
All moving parts have been permanently lubricated and will generally require no
maintenance.
Any correspondence pertaining to this cabinet should be directed to the Service
Department of Nor-Lake, Incorporated. Be sure to include the cabinet model number and
serial number with any correspondence.
Nor-Lake, Incorporated
727 Second Street
P.O. Box 248
Hudson, Wisconsin 54016
MAINTENANCE
SERVICE
800-388-5253 Parts/Service
3
800-388-5253 Parts/Service
800-955-5253 Sales
715-386-2323
715-386-6149 FAX