Taurus WAX-CARE Manual Del Usuario página 11

Fusor de cera
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Ensure that the voltage indicated on the nameplate
matches the mains voltage before plugging in the
appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains socket
properly. Do not alter the plug. Do not use plug
adaptors.
- Never use the electric wire to lift up, carry or unplug
the appliance.
- Do not wrap the cable around the appliance.
- Ensure that the electric cable does not get trapped
or tangled.
- Do not allow the connection cable to come into
contact with the appliance's hot surfaces.
- Check the condition of the electrical connection
cable. Damaged or tangled cables increase the risk
of electric shock.
- As an additional protection to the electrical supply
for the appliance, it is advisable to have a differential
current device with a maximum sensitivity of 30mA.
Ask for advice from a competent installer.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent
the possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor,
if there are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- Do not use the appliance with damp hands or feet,
or when barefooted.
- The power cord must be regularly examined for
signs of damage and if damaged, the appliance must
not be used.
- Do not leave the appliance out in the rain or expo-
sed to moisture. If water gets into the appliance, this
will increase the risk of electric shock.
Do not touch metal parts or the body when it is
operating, as it may cause serious burns.
- The temperature of the accessible surfaces may be
high when the appliance is in use.
- Place the appliance on a horizontal, flat, stable
surface, suitable for withstanding high temperatures
and away from other heat sources and contact
with water.
Use and care:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch does
not work.
- If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains when
Manual Wax Care.indb 11
This symbol signifies that the appliance must not
be used near water
it is not in use, even if it is only for a short while,
as proximity to water involves a risk, even if the
appliance is disconnected.
- Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not put the appliance away if it is still hot.
- Do not expose to extreme temperatures or strong
magnetism.
- Keep the appliance in a dry, dust-free place, out of
direct sunlight.
- Never leave the appliance connected and unatten-
ded if is not in use. This saves energy and prolongs
the life of the appliance.
- Do not use the appliance with pets or animals.
Service:
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer's
liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- The pilot light (F) comes on.
-Opening and closing the protective cover lock
Opening: press the lug on the protective cover to
open and raise the cover.
Closing: press the cover until it fits into its anchoring.
Make sure the wax fuser is clean and free of wax
before closing the cover to prevent it from sticking.
Ensue that the container handle is down and pointing
at the pilot
To remove the container, pull the handle until it locks
in the vertical position. This prevents the container
from rocking.
There are two ways to use the fuser. First, it can heat
standard wax containers in the removable container
or in the heating chamber. The second option is
that it can heat wax tablets or wax poured into the
removable container.
11/06/14 15:05
Tabla de contenido
loading

Tabla de contenido