Alpine SEC-8063 Manual De Operación página 38

1
2
38
Basic Operation
Activating EXT-5 ~ EXT-12
Outputs
The EXT-5 ~ EXT-12 can be used when
SEC-8343 EXT Expander (optional) is
connected.
Pressing the MODE button consecutively will
select the EXT to be transmitted. Refer to the
following chart:
Remote Control
# of MODE
LED Color/Blinks
Button Presses
per second
Once Green/1
Twice
Green/2
Three times Green/3
Four times Green/4
Five times
Orange/1
Six times Orange/2
Seven times Orange/3
Eight times Orange/4
*Above pattern is repeated for 10 sec.
Within 10 seconds, press and hold the
MODE button for at least 2 seconds.
Note: When using the EXT-5 ~ EXT-12
outputs, set the EXT EXPANSION in
the system integration setup to the ON
position. The SEC-8063 (Main Unit)
must be cut. Always request the work
to the Alpine dealer.
English
EXT Selected
EXT-5
EXT-6
EXT-7
EXT-8
EXT-9
EXT-10
EXT-11
EXT-12