Troubleshooting - Beem Pasta-FiXX Manual De Instrucciones

Pasta-FiXX
The following table will help you locate and eliminate minor faults:
Fault
The appliance does not
function when the switch is
moved.
The automatic circuit
breaker in the electrical
distribution board trips
Motor runs extremely
slowly or stops.
NOTE
► If you cannot resolve the problem with the steps described above, please contact
customer service.
26

Troubleshooting

Possible cause
Plug not inserted into socket.
Automatic circuit breaker in
electrical distribution board
tripped.
The internal safety switch has
switched off the appliance as
a result of overheating.
The container and/or the lid
are not fitted properly.
The switches are at different
positions.
Too many appliances connect-
ed to the same power circuit.
Appliance is defective.
Container overfilled.
Pasta dough is too thick.
Remedy
Insert plug.
Switch on the automatic
circuit breaker again.
Allow the appliance to
cool down.
Fit and lock the contain-
er and lid properly.
Move them both to the
same position.
Reduce the number of
appliances on the power
circuit.
Contact customer
service.
Remove some of the
ingredients.
Stir water into the dough
a teaspoon at a time.
BEEM - Elements of Lifestyle
EN